How can you remove fatty layers from the kitchen aspirin filter?

When was the last time you checked the kitchen aspirin and cleaned the filters?

The filter's purpose is to collect fat, so if your aspirin doesn't do his job properly, it's probably locked in multiple fat layers.

In time, fat can block the filter, so it is very important that you clean all the filters from time to time.

Fortunately, cleaning can be simple. This guide will show you how to clean your filter with boiling water, bicarbon soda and dishwashing tool.

Some filters can be washed in a dishwasher, but it depends on how much time has passed since the last cleaning, respectively.

To eliminate the fatty layers you need:

• Too hot or boiling water.
• The quality vessel washing tool
• Bicarbon soda
• Bruceha inbrasive cleaning
• Scissive letters.

Direction:

Remove the filter from the aspirin

Fill a container of boiling water. The warmer the water, the cleaning gets better. Add the bicarbon soda, about half a cup, and the dishwasher. Mix water with powder until it becomes foam. Dive the filters in the water. Leave him in the water for at least 10 minutes.

Clear Filters

After the coat of non-albrasive brush, clean the filters. If necessary, add more to your brushing tools.

Please remove and dry the filters.

Wash the filters in hot water and dry them with paper rags or textile rags.
If you see the need, turn the filters and repeat the entire procedure.