Why does paint on the walls break and break?

A fresh layer of paint is the quickest way to give space a new view. Thus, as soon as the walls lose coolness or small spots appear, many people take the trailer and put new paint on the old one. However, even the walls have their borders.

While there is no firm rule as to how many times a wall can be painted, the artisans warn that many layers of ink, especially when the wall is not properly prepared, can cause cracks, blow, and make paint. Thus, the new painting does not always solve the problem. Sometimes the wall must be cleaned, smooth, and better prepared before it is painted again.

Why does ink start to break and fall?

According to internal settings connoisseurs, there is no “the exact number” showing how many layers of paint can hold a wall. U.S. architect Alan Foster explains that some walls can also face many layers, while in others problems appear after just a few paints.

Most important is the state of the wall. If the wall is dry, clean, and well prepared, the new paint can stay long. But if it is painted over an area that is already peeling or damaged by moisture, the new paint will not climb properly.

Boasty is one of the most frequent causes. The steam in the toilet and kitchen, leaks from the pipes, or weak isolation can blow the paint, create bubbles, and tear it off the wall.

The wall is also a very well - known problem. The dust, fat, and old paint remains do not allow the new layer to connect well to the surface. In this case, even the quality dye does not yield long - term results, so it broadcasts thegraphy.

How do you know that the wall is not to be reliced?

Some signs clearly indicate that the wall needs more than a new layer of ink.

Pay attention if you notice:

• eyebrow, crack, or bubble

• Dust - white tracks that remain in your hand when you touch the wall

• stains and scratches that are not removed with washing

• pale parts of the wall, especially where the sun falls

• mold or dark spots in the corner and in wet spaces.

In such cases, the new painting may conceal the problem for only a short time, while the damage will occur again.

Good preparation of the wall makes the paint last longer

When the old layers of paint are removed from the wall, they must first be removed by the shoulder. Then the surface must be smoothed with emerald paper so that inequalities and new ink can be removed better.

Stalls and holes are arranged to level the wall. Once the mass is dried, the wall is again smoothed. Before painting, dust and fat must be thoroughly cleaned, while the strongest spots are removed with soft seasickness.

The bottom line is the base layer, also known as acetar, which strengthens the wall and helps to keep the final ink longer.

How often should different spaces be painted?

How often a space must be painted depends on its use, humidity, and pollution.

The recommendations are:

• kitchens and baths every three to four years

• Corridors and stairs every two to three years

• Daily rooms and bedrooms every five to seven years, depending on the state of the walls.

The best - quality dyes usually cover better, are more stable to daily use, clean up easier, and split less over time.

Boasting and mold are not just a visual problem

Making ink often points to a deeper problem - humidity and mold. Mold spores can adversely affect health and aggravate symptoms of asthma, allergies, coughing, clogged noses, and eye irritability.

More sensitive are children, the elderly, and vulnerable persons.

Also, some noncial paints can produce harmful vapors that can cause headaches, dizziness, and irritability of respiratory paths.

Hence, before any new painting, it is important to find the cause of damage and to prepare the wall properly rather than cover the problem with just another layer of paint. /Telegraphy/